com.github.actions.AbstractTypedJob1.3.0

Defaults to all module properties rendered as either Pcf or the format specified on the command line.

You can use any supported context and expression to create a conditional. For more information on which contexts are supported in this key, see Contexts reference.

It can be a string or array of strings. If a job fails or is skipped, all jobs that need it are skipped unless the jobs use a conditional expression that causes the job to continue. If a run contains a series of jobs that need each other, a failure or skip applies to all jobs in the dependency chain from the point of failure or skip onwards. If you would like a job to run even if a job it is dependent on did not succeed, use the always() conditional expression in jobs.<job_id>.if. See: https://docs.github.com/en/actions/reference/workflows-and-actions/workflow-syntax#jobsjob_idneeds

A concurrency group can be any string or expression. Allowed expression contexts: github, inputs, vars, needs, strategy, and matrix. For more information about expressions, see Evaluate expressions in workflows and actions. You can also specify concurrency at the workflow level. For more information, see module.concurrency. This means that there can be at most one running and one pending job in a concurrency group at any time. When a concurrent job or workflow is queued, if another job or workflow using the same concurrency group in the repository is in progress, the queued job or workflow will be pending. Any existing pending job or workflow in the same concurrency group, if it exists, will be canceled and the new queued job or workflow will take its place. To also cancel any currently running job or workflow in the same concurrency group, specify cancel-in-progress = true. To conditionally cancel currently running jobs or workflows in the same concurrency group, you can specify cancel-in-progress as an expression with any of the allowed expression contexts.

Note: The concurrency group name is case insensitive. For example, prod and Prod will be treated as the same concurrency group. Ordering is not guaranteed for jobs or workflow runs using concurrency groups. Jobs or workflow runs in the same concurrency group are handled in an arbitrary order.

Docs: https://docs.github.com/en/actions/how-tos/write-workflows/choose-what-workflows-do/run-job-variations

A matrix strategy lets you use variables in a single job definition to automatically create multiple job runs that are based on the combinations of the variables. For example, you can use a matrix strategy to test your code in multiple versions of a language or on multiple operating systems. For more information, see Running variations of jobs in a workflow. Docs: https://docs.github.com/en/actions/reference/workflows-and-actions/workflow-syntax#jobsjob_idstrategy

For more information, see Use GITHUB_TOKEN for authentication in workflows. By specifying the permission within a job definition, you can configure a different set of permissions for the GITHUB_TOKEN for each job, if required. Alternatively, you can specify the permissions for all jobs in the workflow. For information on defining permissions at the workflow level, see module.permissions. For each of the available permissions, shown in the table below, you can assign one of the access levels: read (if applicable), write, or none. write includes read. If you specify the access for any of these permissions, all of those that are not specified are set to none. Docs: https://docs.github.com/en/actions/reference/workflows-and-actions/workflow-syntax#jobsjob_idpermissions

The destination machine can be either a GitHub-hosted runner, larger runner, or a self-hosted runner. You can target runners based on the labels assigned to them, or their group membership, or a combination of these. You can provide runs-on as:

• A single string
• A single variable containing a string
• An array of strings, variables containing strings, or a combination of both
• A key-value pair using the group or labels keys
• If you specify an array of strings or variables, your workflow will execute on any runner that matches all of the specified runs-on values. For example, here the job will only run on a self-hosted runner that has the labels linux, x64, and gpu:

  `runs-on` { "self-hosted"; "linux"; "x64"; "gpu" }
  

  For more information, see Choosing self-hosted runners.
• You can mix strings and variables in an array. For example:

  `runs-on` { "self-hosted"; "${{ inputs.chosen-os }}" }
  

If you would like to run your workflow on multiple machines, use strategy.

Fractional values are not supported.

You can also set variables for the entire workflow or a job. For more information, see env and jobs.<job_id>.env. When more than one environment variable is defined with the same name, GitHub uses the most specific variable. For example, an environment variable defined in a step will override job and workflow environment variables with the same name, while the step executes. An environment variable defined for a job will override a workflow variable with the same name, while the job executes. Public actions may specify expected variables in the README file. If you are setting a secret or sensitive value, such as a password or token, you must set secrets using the secrets context. For more information, see Contexts reference.

Job outputs are available to all downstream jobs that depend on this job. For more information on defining job dependencies, see needs. Outputs can be a maximum of 1 MB per job. The total of all outputs in a workflow run can be a maximum of 50 MB. Size is approximated based on UTF-16 encoding. Job outputs containing expressions are evaluated on the runner at the end of each job. Outputs containing secrets are redacted on the runner and not sent to GitHub Actions. If an output is skipped because it may contain a secret, you will see the following warning message: "Skip output {output.Key} since it may contain secret." For more information on how to handle secrets, please refer to the Example: Masking and passing a secret between jobs or workflows. To use job outputs in a dependent job, you can use the needs context. For more information, see Contexts reference.

You can provide the environment as only the environment name, or as an environment object with the name and url. The URL maps to environment_url in the deployments API. For more information about the deployments API, see REST API endpoints for repositories.

Steps can run commands, run setup tasks, or run an action in your repository, a public repository, or an action published in a Docker registry. Not all steps run actions, but all actions run as a step. Each step runs in its own process in the runner environment and has access to the workspace and filesystem. Because steps run in their own process, changes to environment variables are not preserved between steps. GitHub provides built-in steps to set up and complete a job. GitHub only displays the first 1,000 checks, however, you can run an unlimited number of steps as long as you are within the workflow usage limits.

If you have steps that use both script and container actions, the container actions will run as sibling containers on the same network with the same volume mounts. If you do not set a container, all steps will run directly on the host specified by runs-on unless a step refers to an action configured to run in a container.

Set to true to allow a workflow run to pass when this job fails.

These are useful for creating databases or cache services like redis. The runner on the virtual machine will automatically create a network and manage the life cycle of the service containers. When you use a service container for a job or your step uses container actions, you don't need to set port information to access the service. Docker automatically exposes all ports between containers on the same network. When both the job and the action run in a container, you can directly reference the container by its hostname. The hostname is automatically mapped to the service name. When a step does not use a container action, you must access the service using localhost and bind the ports.

Use one of the following syntaxes:

• {owner}/{repo}/.github/workflows/{filename}@{ref} for reusable workflows in public and private repositories.
• ./.github/workflows/{filename} for reusable workflows in the same repository. In the first option, {ref} can be a SHA, a release tag, or a branch name. If a release tag and a branch have the same name, the release tag takes precedence over the branch name. Using the commit SHA is the safest option for stability and security. For more information, see Secure use reference. If you use the second syntax option (without {owner}/{repo} and @{ref}) the called workflow is from the same commit as the caller workflow. Ref prefixes such as refs/heads and refs/tags are not allowed. You cannot use contexts or expressions in this keyword.

This method is used to convert the values of string interpolation expressions to strings.

This method is the complement of the ?? operator and the equivalent of an Option type's map and flatMap methods.

Throws if a property with this name does not exist.

Returns null if a property with this name does not exist.

Throws if no such path exists.

For example, if module mod1 has path /dir1/mod1.pkl, and module mod2 has path /dir1/dir2/dir3/mod2.pkl, then mod1.relativePathTo(mod2) will return List("dir2", "dir3").

A common use case is to compute the directory path between a template located at the root of a hierarchy (say rootModule.pkl) and the currently evaluated module (accessible via the module keyword):

import "rootModule.pkl" // self-import
path = rootModule.relativePathTo(module)